Search results

  1. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    I figured it was absolutely necessary, because even really good PSU's are not perfect, +12VDC can range up and down by a few tenths of a volt, and if one PSU is skewing high, and one low, you could have some reverse power flow going on, and god knows what that might do to the PSU witht he lower...
  2. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Alright. Some numbers. First off, the flow through the radiators is actually a little bit better than my previous pessimistic figures. I think during the first fill I forgot that I had to tell the Aquaero which type of flow meter was connected for the calibration data. So I get 232 L/h...
  3. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Alright, first off, here are some semi- finished (could still use some cleanup, especially the rack cable management which is a bit of a rats nest) Phase 1 pictures. ...yeah, this is obviously the back of the rack, not very visible, but it is a rats nest of fiber optic, Ethernet and...
  4. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Alright, some troubleshooting later I found the problem. One of the crimps on my custom cabling was bad. ...so now I had to crawl on the floor and crimp laying on my side. Fun fun.... Now to get the external loop to trigger when the workstation powers on. I have an opto-isolated relay...
  5. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    ...and yes. I do realize there are only 7 bottles in that picture. I don't know what happened to the 8th one. I misplaced it somewhere during my mixing and filling 😅
  6. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    I decided to replace the rubber gasket in the hole in the back of the box with a clamping fitting to prevent accidental ripping out of wires and bending of pins. Since the hole was a little large, this resulted in needing a set of reducing washers: Which brings us to another thing I...
  7. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    I decided it was time to replace the temporary CPU cooler in the workstation with the water block. I started this on a Friday evening after work, knowing that at this point I have crossed the river. Absolutely everything I do on this project takes longer than I expect, and I had to be up and...
  8. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    You and me both 😅
  9. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Alrighty then, Time for a bit of an update. As I am getting close to reinstalling all the water components, and the old loop had some cleanliness problems there for a bit, I decided it was time to give the old Watercool Heatkiller IV Pro STRx4 block another cleaning. It looked pretty good...
  10. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    ...and I apologize for the silence, there will be some updates in the not too distant future. This is a busy time of year between work end of year deadlines and holiday family obligations....
  11. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    I guess the point is, I have invested heavily in radiator capacity. I want to be radiator capacity limited, not flow limited. If the temps in the loop start climbing, not because there is insufficient radiator capacity, but because there is insufficient flow to fully take advantage of the...
  12. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Sorry, Can't see it 😅 Between my pihole, my VPN and LIbrefox, I have never been able to see anything on Instagram or TikTok, and for the last year or so, reddit is now off limits as well. I guess I'll just do without them. No content is worth being tracked. :p
  13. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    You have to separate heat flow from coolant flow and temperature. Think of it this way. Imagine pushing a theoretical very low flow rate through the radiators top the point where the dwell time of any given slice of coolant in the radiators is so long that it is guaranteed to be exposed to the...
  14. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Well, what I am talking about is related to mixing ratios. If we had the coolant coming in from the radiator at 0.8GPM at ambient (lets make it easy and say 20C) and the coolant coming in warmed up from the blocks lets say at the same flow rate at lets say 26C, this would be a 50:50 mixing...
  15. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    In a traditional loop that exits the radiator and goes straight into the block, that would be accurate*, but since I have decoupled the hot sides and the cold sides of my loop, they can operate at different flow rates, so ambient at too low in the "mixing chamber" can be a lot worse than above...
  16. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    The cooling effectiveness winds up being a combination of the flow rate through the radiator and the temperature when exiting the radiator. Higher flow rate results in higher exiting temperatures (less of a temperature decrease across the radiator) but there is also much more coolant at that...
  17. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Yeah, it winds up being a set of differential equations. The flow may be faster across the blocks, but that means that each cycle of water also heats up less, so it isn't a big problem. This is a rather unique way of looking at things due to my approach of breaking up the loop and using the...
  18. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Thank you sir! It still feels a little bit messy to me, but once I get the medusas hair of wires inside the flexible conduit, I think I will be much happier with it :)
  19. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Oh, and I forgot to mention, the little boiled black Noctua fans actually help keep the DDC pumps quite cool. The heat sink feels cold to the touch even after running at full speed for 24 hours. I understand these normally can get quite warm, and some have suggested this might shorten their...
  20. Zarathustra

    The Z Build(s) 3.0 - Go Big and/or Go Home

    Alrighty, Way too long between updates again, but such is life. I was able to make some progress this weekend, and got the fittings bends and tubing installed for the Radiator side of the loop installed, and test filled (with just distilled water) to test for leaks. Here is the top reservoir...
Become a Patron!
Back
Top