Don’t Expect DDR5 to Go Anywhere Anytime Soon, as DDR6 Isn’t Planned to Arrive for Commercial Applications Until 2028

Peter_Brosdahl

Moderator
Staff member
Joined
May 28, 2019
Messages
10,683
Reaction score
7,520
A new report has indicated that each of the three big memory chip manufacturers has begun ramping up its development of DDR6. According to The Elec (via TechPowerUp), Samsung, SK Hynix, and Micron are all working with JDEC on the next standard, which could see speeds as high as 17,600 MT/s or more. However, the […]

See full article...
 
We will be in the 2030s before DIY gets access, and begins to adopt it in any real numbers.
 
Head on over to Anandtech FS/FT forums. Some kits on sale there. May make sense for you.
Shipping overseas? Unlikely. I have no inclination to upgrade anything at the current prices. I'll probably use my current DDR4 board until it stops working, and even then I'd weigh my options whether is it worth to get new stuff with DDR5, or simply buy another DDR4 MB.
 
I count myself lucky and bit the bullet in upgrading one of my setups to DDR5/AM5 last spring through some careful shopping which had enough discounts involved to basically be MSRP or lower for nearly all parts. I still ended up dropping a lot of dough for everything but it was before things went bonkers again. My remaining 5800X3D setup is looking like it'll be here to stay, but that's not really a bad thing since it still holds up well. More than likely I'll just end up replacing its AIO in the next year or so.

The biggest difference between the two that I've noticed is that the 9800X3D uses less TDP and is more easily cooled due to its flipped cache design and a better AIO on it, and is just a little faster in terms of FPS or load times but not enough for me to justify doing another AM5 build under current market conditions.

On the flipside my build constraints are more related to wanting to stick with the two Lian Li mATX cases I'm using for them but if push comes to shove I do have another mostly ready AM5 build, sans processor, and a preferred PSU with slightly slower memory than the current 9800X3D build, sitting and waiting in a full-sized case. This was the catalyst for my first AM5 updgrade as a prebuilt with a 5090 that was nearly MSRP for all parts involved, and now is waiting as a backup plan depending on when AMD releases its 12-core Zen6 CPUs and when I might be able to afford one. However, I'm feeling more confident with every day that this will be one of, if not very, last builds I do before I retire with the way all of the PC and gaming industry is going. A fixed income isn't going to support this hobby.
 
A fixed income isn't going to support this hobby.
For sale and trade forums are the meta on a tight budget. You will always have fairly modern parts on the cheap to build and upgrade with. Selling your old parts defrays a little of the cost as well. Message boards like this are populated mostly by older financially established white collar professionals. Many are whales. They let quality kit go for cheap as they move on to the latest and greatest. Can usually haggle a better price than they list too.

My joking non serious response is you are doing it wrong. You just need to grow the site enough to get real ad money and corpo swag. Enough for you yourself to get a slice of that pie. How do you do that you may ask? Shill, shamelessly shill. :p Digital Founder's Edition, TechPowerUP, Tom's Hardware, all shameless shills. Business Daddy will take care of you. Sycophants will flock to your site to get the warm fuzzies as you reinforce their confirmation biases. Your reality distortion field will be large enough that they can snuggle up in yours and not have to worry about it penetrating theirs.💲💲💲
 
Become a Patron!
Back
Top