LIAN LI has launched the V3000 PLUS, a modular full-tower PC case that can fit up to an EEB motherboard and ITX motherboard and be configured to three different modes.
See full article...
See full article...
LIAN LI Launches V3000 PLUS Full Tower PC Case with Three Configurations, including Dual System Mode
- Thread starter Tsing
- Start date
Brian_B
Forum Posting Supreme
- Joined
- May 28, 2019
- Messages
- 8,261
- Points
- 113
Yeah, I loved their all aluminum cases - didn't always like the designs, but the build quality was really nice. I still have a full sized on running in my office from back when I did custom water loops that's something like 15 years old now. For a long while, all I used were LL cases, they were always nice.
The last 2 LL's I've got though - aren't aluminum, and aren't any better than knockoff Newegg cases. Not "OMG gonna burn down the house" bad, but definitely not what I had come to expect from LL, and I could have just got a generic and got the same case and saved a few bucks.
Next build will probably look at something else.
Niner51
FPS Junkie
- Joined
- May 29, 2019
- Messages
- 2,223
- Points
- 113
I have as well. The 011 Dynamic "hot box" was the end for me with their cases. Not sure why that one became so popular, besides all the glass on the side and front. Their latest case (the 216 I believe) was reviewed by GN and it bowed at the top, which I found ridiculous.
LazyGamer
FPS Junkie
- Joined
- Sep 5, 2020
- Messages
- 2,822
- Points
- 113
The fans are alright - definitely going on looks more than performance - but their software is just bad.
They're not alone in that, not even close, but man, we need better. I'd much prefer fan control as well as RGB control be an open thing.
Their cases are... good. Usually a good value too, and they compete well with the likes of NZXT, Corsair, Fractal Design, and so on. Plenty like this V3000 PLUS that do interesting things that may or may not be useful for most.
They're not alone in that, not even close, but man, we need better. I'd much prefer fan control as well as RGB control be an open thing.
Their cases are... good. Usually a good value too, and they compete well with the likes of NZXT, Corsair, Fractal Design, and so on. Plenty like this V3000 PLUS that do interesting things that may or may not be useful for most.
LazyGamer
FPS Junkie
- Joined
- Sep 5, 2020
- Messages
- 2,822
- Points
- 113
It's cooler if you put a loop in it?
Niner51
FPS Junkie
- Joined
- May 29, 2019
- Messages
- 2,223
- Points
- 113
I mainly use their fans due to the daisy chain wiring being way more manageable. I like the Corsair fans, but not their mess of wires that come with them. I haven't had too many complaints about Lian Li's software, and compared to others it isn't always as problematic. Not perfect by any means though.
When I had some pads come unglued on a set of AL120 fans Lian Li was quick to send out replacements though in the wrong color. I replied to them that I would just use the ones sent anyway, but they sent out another set of correct fans due to their error free of charge for all.
LazyGamer
FPS Junkie
- Joined
- Sep 5, 2020
- Messages
- 2,822
- Points
- 113
Shoot, I have side and bottom intakes, with top and rear exhaust... side and bottom have 360mm rads. Works pretty well and I've considered adding a top rad at some point.
This is why I had to try them, and while I love that part of the idea, I'd prefer to have a hardware controller that could:
- remember its settings - current controllers need the software running
- be able to run without the controller hooked up to USB, and instead just as a PWM / RGB hub for the fans
- be able to be controlled by other software (OpenRGB, Signal RGB)
As to the issues I've faced, I found that the Lian Li software would cause my mouse cursor to 'jump' at a fairly regular interval, and the need to have GPU-Z running in the background as part of the app is also infuriating.
LazyGamer
FPS Junkie
- Joined
- Sep 5, 2020
- Messages
- 2,822
- Points
- 113
I'm not sure if aluminum makes much sense, really. More expensive, weaker, doesn't inhibit EMI... and well, most of the weight is still coming from the parts inside. Some entry level ATX cases, with steel construction and a glass side panel, are immaterially heavier than the aluminum Lian Li cases of old when empty, and likely a rounding error away when loaded up.