Looking for a new case

That be a lot of radiators. Need a few pumps in series to run the whole kit, lol.

pic8.jpg

One thing that jumped out at me with regard to this image was the mention of the 600mm radiator. I guess that's 3x 200mm fan slots?

I've never seen or heard of such a thing. Googling isn't helping either. I keep finding car parts and bathroom towel radiators.

Do radiators like this actually exist? Are there any 200mm fans with decent static pressure?
 
Alright,

Since we are dropping our personal experiences with cases, I'll drop my recent experience here as well.

As some of you may know, I used to rock a mildly modified Corsair 750D with some large radiators shoehorned in. In late January my Threadripper build I'd only had going for a month and a half stopped working, paperweight style. Press button, no power. Pulled out everything that can be pulled out and still post, still nothing when trying to power it on.

Troubleshooting was difficult because I didn't have spares for many of these things, No Spare DDR4, no Spare TRX40 Motherboard, no spare TRX40 CPU. Anyway to make a long story short, a month of troubleshooting and waiting for incorrectly suspected RMA's to return later, I found I had accidentally damaged my Corsair 750D during troubleshooting. I also found to my surprise that the component that had failed was not the PSU, not the RAM, not the Motherboard, but the CPU! (This was a first for me). AMD's RMA process was perfect, but it took some time to get there.

Anyway, so my case was damaged, and I'd been wanting to expand my loop anyway, so I figured it was time to go for an even larger case, and throw some total overkill radiator capacity in there.

I poked around for a while. I knew I wanted something BIG. I was considering the Thermaltake Core case Dan used above. I was also considering trying to find old stock CaseLabs but that proved impossible.

In the end I went with the Corsair 1000D. It wasn't the RGB or glass that drew me in. It was the fact that it reportedly can fit two 480 radiators in the front and two up top. Since my goal was overkill radiator capacity, this appealed to me. I had originally not considered this case, as I thought of it as too flashy, and too expensive, but as I was researching a discount on an "Amazon Renewed" open box version popped to th etop of my searches, and I decided to do it.

Don't get me wrong. I knew I was going with something slightly ludicrous and huge, but no matter how much you read or measure or how many pictures you look at, absolutely nothing prepares you for the sheer size of this thing when it arrives. It is a bit like the opposite of accidentally buying doll house furniture on Amazon.

View attachment 244 View attachment 245 View attachment 246

That last one on the left are my old case (Corsair 750D) next to my new case (Corsair 1000D). Keep in mind that the 750D is a full tower, and not tiny either. That last poicture is the best one I have when it comes to communicating the sheer size of the thing.

This is where I should state that this build took me abnormally long to complete. In part because it was a large and complex build, in part because I ran into a surprising number of incompatibilities and further RMA's along the way (some of which are still not resolved) and in part because in a world grinding to a halt because of the virus pandemic, needing to get absolutely anything slows you down to a crawl. Short one fitting? Well, it's a "non-essential item" on Amazon, so maybe you'll get it in 3-4 weeks if you are lucky.

So, this was my most frustrating build I've ever worked on, and I only just got it up and running in my office two nights ago, meaning I was without my desktop for 3 months. If anyone is curious about my build, I documented it here. The rest of this post will be focused on my take on the case.

This case has many positive features.

1.) The fan/radiator mounts slide out on arms making for easier installation of fans and radiators. The only downside to this is that once you are done with assembly and attach all of your tubing, unless you used really long tubing or QDC fittings, you have to break into and drain the loop if you need to gain access to the fans or radiators again.

View attachment 250

2.) Everything about this case is huge. While cable routing can be a little difficult because of the cable length requirement, you'll never run out of space for tucking cables away out of sight for good cable management.

3.) You can fit lots of fans and a lot of radiator.

4.) If you want to, you can even mount two PC's in this case, one EATX and one mini ITX


I'd also be amiss if I did not mention some pretty stupid design flaws.

1.) The marketing material for this case states that out of the box you can fit a 420mm (3x140) radiator up top, and two 480mm (4x 120) in the front. They also claim you can buy a 2 x480mm bracket for the top of the case, making it able to fit 4 480mm radiators. There are a few problems with that. Firstly, in the 3 months I've been doing this, I've never see any accessories what so ever, including the optional top 480mm top radiator bracket in stock anywhere, not even on Corsairs site.

More seriously, they didn't think through the radiator mount locations particularly well. Sire all the holes are there, but if you attach a 420mm radiator up top, and two 480mm radiators in the front, they will interfere with eachother, unless you use very thin radiators. Push pull becomes even more impossible.

View attachment 251

The part that makes this a stupid design flaw is that there is extra space. The top bracket could have moved the fan holes backwards a little bit and it would have fit just fine. Clear sign that whomever designed this never built a water cooling loop into a case. So I did what any self respecting modder would. I made my own mounting bracket. Again, if interested you can check the link to my build log above.

View attachment 252 View attachment 253

2.) The marketing material USED to claim that you could fit two 140mm exhaust fans in the back. It no longer does, because you can't. (Well, you can, but it involves taking a Dremel to your fans, and drilling extra fan screw holes, which I did.

3.) One of the awesome aspects of my previous case, the 750D was how everything was moddable and stackable. It came with brackets with 3.5" drive bays you could stack up the bottom of the case, or take out if you didn't need or want them to make space for something else. Naturally I assumed the 1000D would do the same. It doesn't. If you want 3.5" drives in your case, it has a 5 bay box in the bottom. This box is riveted to the rest of the case, so unless you want to mod stuff, it is there to stay. (I drilled the rivets out and took it out, because that's where I wanted my pumps)

View attachment 249

4.) This is a heavy case. Corsair specs it as 65lb when empty. Add heavy blocks, radiators motherboards, drives, etc. and 3L of coolant, and I swear this thing weighs more than 100LB. Also, it has no handles. There are no good places to get a firm grip anywhere.

Now this is where I mention, I am a large guy. I haven't in a while, but I used to go to the gym and bench my own body weight, and do several long sets of unassisted pull-ups. I'm 6'3" and probably 240lb at this point. I'm not as strong as I once was, but I am also no wimp. Moving it up the narrow stairs from my basement to my office when I was done building almost resulted in disaster. I **** near fell down the stairs with it in my arms. Yes, Corsair lists this as being a two man lift in their documentation, but even with two people, there are no good places to grip it. The glass gets in the way, and I don't want to lift it by glass.

Once I got it up the stairs, I put a blanket on the hardwood floors and just dragged it the rest of the way. When I got to my office and placed it down on the rug under my desk it would not budge. Putting all of my weight behind it, it just wouldn't slide on the rug. There is also less than an inch clearance between the top of the case and the bottom of my desk, so I couldn't just lift it in. The combination of the weight and the very sturdy high quality rubber feet were the problem. In a stroke of genius, I put some old health insurance cards (you know the thick laminated paper kind), one under each foot. That made it slippery enough that I could slowly slide it under my desk.

The weight is obviously not Corsairs fault, but knowing they were designing a case that would be heavy assembled, having somewhere to grip it in order to move it would probably be a good idea.

Two days after bringing the case up, my back is still a little sore. That is on me. Stupid of me to not wait until I could have someone help me move it, but I was just so damned over this build and wanted to finish it once and for all.


Here is a pic of the completed build before moving it upstairs, and a pic of the final location of the case under my desk:

View attachment 247

Everything about this case throws off your sense of perspective. So just for reference, that motherboard is a large EATX board.

View attachment 248

So, with everything said and done, I wound up with an awesome build, with great cooling capacity.

That said, I'm not convinced I would actually recommend this case to anyone.


****. I hate it when I type a long post, only to have it be the last post on a page, and no one ever sees it...
 
Well I saw it and thanks for all the effort. Geez that was a crazy amount of stuff you had to go through. In the end WOW! its looking good. You should try to send to GURU3D for their rig of the month.

Interesting. I didn't know they did that.

I guess I should make it off of the [H] and this site more often :p

I'm not sure how it well it would be received among the kids these days. No RGB! :p
 
Here's the new makeshift work from home office. I'll probably keep it even after all this is over just to have an actual desktop area again as both my other rigs are set-up in a hybrid entertainment mode, i.e. connected to t.v.s and such. I had to modify the desk for the 2nd monitor and using a laptop stand to extend more space.

20200424_164738.jpg
I never though I care one way or another about top ports on a case but man it's nice in this setup. Its one of those ergonomic things you don't realize until you have a desk like this.
20200424_164745.jpg

Here's a little bit of a side view from the case but I didn't have anything on hand to set it on once pulled out of the desk hence not an entire view but I think you get the idea. Plus as I mentioned earlier I'm not completely satisfied with my own cable management in it either. You can also see how I set up the hyper 212 fan to be a pull fan because it doesn't clear the ram I'm using.
20200424_164820.jpg
And finally a bit of a front shot.
20200424_170428.jpg
 
Interesting. I didn't know they did that.

I guess I should make it off of the [H] and this site more often :p

I'm not sure how it well it would be received among the kids these days. No RGB! :p
Too true. I've noticed Hilbert tends to focus more on that stuff but he really does emphasize custom stuff too.
 
Here's the new makeshift work from home office. I'll probably keep it even after all this is over just to have an actual desktop area again as both my other rigs are set-up in a hybrid entertainment mode, i.e. connected to t.v.s and such. I had to modify the desk for the 2nd monitor and using a laptop stand to extend more space.

View attachment 255
I never though I care one way or another about top ports on a case but man it's nice in this setup. Its one of those ergonomic things you don't realize until you have a desk like this.
View attachment 256

Here's a little bit of a side view from the case but I didn't have anything on hand to set it on once pulled out of the desk hence not an entire view but I think you get the idea. Plus as I mentioned earlier I'm not completely satisfied with my own cable management in it either. You can also see how I set up the hyper 212 fan to be a pull fan because it doesn't clear the ram I'm using.
View attachment 257
And finally a bit of a front shot.
View attachment 258


I like it.

That's an interesting desk too. Is it customized?


How does the left part where the leftonitor is standing connect?
 
Some specs on that thing.

i7 2600K@4.2GHz/MSI GD65 Z68/G.Skill Trident 32GB 2133MHz/Strix 1080 Ti @ (~1987-2012 MHz/11.8 GHz)/2x Samsung 850 EVO 500 GB(SATA III)/Corsair 1200HXi/GIGIABYTE WiFi-BT card

The PSU is way overkill but as I mentioned it was intended to be a spare. The MOBO/CPU were the core components from my first build done after the Intel "i7's" began. Could only imagine how many hours they have on them. CPU has been OC'd via OC genie since day 1 and now were almost ten years on. Rig does alright for 1080p/1440p 120hz-144hz gaming but the CPU is long in the tooth now. Not uncommon for me to see it peg 80-99% for brief moments. That 1080Ti is still a champ for those resolutions and not too shabby with compromises in 4K.

Temps in this case:
With the front cover and top mesh on I've seen the CPU avg 62c-72C and the GPU hit 62c but with a custom fan curve that cranks the gpu fans to 100% at 60c. Nothing terribly wrong with that but I like to keep my stuff between 50c-60c when gaming. Everything just seems happier and I get better overclocks on the GPU. At idle both sit in the 40c-50c. If I remove those covers then I've seen temps drop by over 10c on both.
 
I like it.

That's an interesting desk too. Is it customized?


How does the left part where the leftonitor is standing connect?
That black leftmost board is something I had from god knows what. One of those people that saves some odds and ends. Color matched so I mounted using four matched screws that go deep enough within mm of going through the other desk. They were perfect. I picked the position based on putting the mouse pad and keyboard on the top part. Depending on how I feel I then have the option of either positions. Using laptop stand underneath that part for additional support but it doesn't really need it. Gives more space for paperwork too.

edit: Had to step a away for a bit but thought I'd add this pic to show what I mean about the mouse pad and keyboard on top. The monitors are a 3D/120HZ Asus 27" and LG MU3197B Cinema 4K(4096x2160) 10 Bit. That LG is awesome for having split screen windows for working. It was my 1st IPS panel too. All this reminds me I still need to get a UPS for this setup now.
20200424_175840.jpg
 
Last edited:
Too true. I've noticed Hilbert tends to focus more on that stuff but he really does emphasize custom stuff too.

Well what do you know. I actually have an account over there I had forgotten about. I signed in and posted twice in a thread anticipating the new Corsair H100 back in 2011 😅

The forum profiles are pretty detailed there. Apparently I was rocking my old Phenom II X6 1090T at the time, overclocked to 4Ghz :p
 
Last edited:
Well what do you know. I actually have an account over there I had forgotten about. I signed in and posted twice in an thread anticipating the new Corsair H100 back in 2011 😅

The forum profiles are pretty detailed there. Apparently I was rocking my old Phenom II X6 1090T at the time, overclocked to 4Ghz :p
Pretty awesome! I can't remember if I've ever fully setup anything over there. I know I was thinking about it back when I joined [H]'s forum years ago but at the time I was already on at Tom's. Shortly after that I quit the forums at Tom's because it was too toxic. I didn't have to deal with much but I didn't like what I saw either. Sometime after that I realized I really only have time to post anything on one site but I still go to around a dozen+ to keep up with stuff. Always been that way.
 
It really chaps my sphincter that CaseLabs went out of business or I'd already have a new case.

Considering the ThermalTake View 71, While not capable of a 480, it can do dual or triple 420's.

I have this case. It's the first non-Corsair/Lian Li I've bought. It's really big. I have a 360 Radiator on top, six more fans, 3 GPUs 4 SSDs and a 4TB spinner. The bottom half looks empty.
 

Attachments

  • IMG-3050.jpg
    IMG-3050.jpg
    2.2 MB · Views: 8
When you need more room go Core X5.
 
I have this case. It's the first non-Corsair/Lian Li I've bought. It's really big. I have a 360 Radiator on top, six more fans, 3 GPUs 4 SSDs and a 4TB spinner. The bottom half looks empty.
The layout and size really reminds me of my Coolermaster HAF's.
 
Become a Patron!
Back
Top